Installation

  1. Connect the WAN port of the fax bridge to an active RJ-45 ethernet jack.
  2. Connect the Phone 1 port of the fax bridge to the fax machine (Line 1 of fax enabled MFP/printer).
  3. Connect the power cord to an active electrical outlet.

💡 Note: The LAN/PC port of Phone 2 port should NOT be used.

Untitled

Status Lights

Untitled (2).png

Power

Green = Power is on

Unlit = No power

Status

Green = Device is ready. This doesn't mean it is connected to the fax server

Unlit = Booting up or not ready

Red = Booting up or error

WAN

Green = Connected to ethernet

Unlit = Not connected to ethernet

Amber (flashing) = Downloading Firmware update (70% illumination) or Has WAN activity. (20% illumination) The light appears to always blink thus, it is difficult correlate illumination with data transmission.